-
How to Install an ECU in a 2003 Buick
سهشنبه 9 شهریور 1395 04:15
The engine control unit (ECU) in a Toyota Prius is the computer responsible for operating all of the engine's electronic components. This computer monitors data from various sensors throughout the vehicle in order to determine its operational state. When the ECU senses a problem with the engine or one of its related...
-
How to Turn Off a Check Engine Light on a Nissan
جمعه 8 مرداد 1395 09:25
Nissan cars have become more technologically advanced in recent years. ECU (Engine Control Unit) computers are now an integral part of Nissan car design. The ECU constantly monitors and governs many functions, including the electrical and safety systems of the car, and engine management. When this unit detects a...
-
How to Turn Off a Check Engine Light on a Nissan
جمعه 8 مرداد 1395 09:25
Nissan cars have become more technologically advanced in recent years. ECU (Engine Control Unit) computers are now an integral part of Nissan car design. The ECU constantly monitors and governs many functions, including the electrical and safety systems of the car, and engine management. When this unit detects a...
-
How to Reset the ECU on a Nissan Serena
یکشنبه 3 مرداد 1395 05:50
The Engine Control Unit, or ECU, controls the majority of the computer-operated sensors and engine devices on a Nissan Serena. delphi ds150e Fuel and ignition systems are monitored and adjusted using a variety of engine-mounted sensors and feedback. The ECU also stores diagnostic codes for failure analysis and...
-
Solved - Misfire on cylinders 1,2,3,5 and 6 exhaust at idle, cat damage at 4k rpms
جمعه 25 تیر 1395 09:50
I'm posting this hoping it will help someone. I had a misfire at idle, not very noticeable, no SES light. At 2k rpms in 2nd gear or above the engine would stumble. At 3k+ rpms it would even out and feel fine but not quite as much power as it should have. Pulling codes with INPA showed "A" misfire on exhaust...
-
No eeprom option in OBDSTAR X100 pro, how to use EEPROM PIC adapter?
چهارشنبه 9 تیر 1395 04:42
Starts with my question: how to use the eeprom adapter of OBDSTAR X-100 PRO ? There is no EEPROM MENU in the handheld….. But I bought X100 pro with C+D+E configuration included in package two EEPROM adapter. There is no eeprom option in my device. Finally, I sort it out, I did like this: Just contact my supplier then...